A Step by Step Approach to Creating Concrete Driveways

Best concrete driveways in Melbourne!

A Step by Step Approach to Creating Concrete Driveways

A Step by Step Approach to Creating Concrete Driveways

A common site on properties in Australia is a concrete driveway on which you can drive up to front porches or to garages. Concreting a driveway is a project that can be undertaken by homeowners who are proud of their DIY skills. Building a concrete driveway requires certain factors to be taken into account and the right steps to be followed. Click here for more detail about driveway/sidewalk.

A Step by Step Approach to Creating Concrete Driveways

You need to choose the right concrete that can cope with all the weight and movement of vehicles that will use your driveway. You can get this concrete of the right grade from ready-mix companies once you tell them of the use you will be making of the concrete driveway. They will also be of help in calculating the required amount of concrete once you tell them the length, width, and depth of your proposed driveway.

A Step by Step Approach to Creating Concrete Driveways

When you are wanting to install a driveway, you need to prepare the ground on which the driveway is to be laid. Remove the top layer of soil and dig it down to at least 10 cm which is the minimum suggested thickness of a concrete driveway. If the soil is poor, you may need to dig down deeper and then fill up the extra depth again with gravel that must be rolled and consolidated. It can also help to saturate the dug up area with weedkiller, to prevent any growth in the future. See that the final layer of gravel or soil is properly compacted with plate compactors or mini rollers that you can easily hire out. Make sure that your final top level of the concrete will allow the driveway to drain easily and not allow ponding of water. In case this is likely, you may need to find ways to drain the water from the rain or washing.
Visit: http://www.thedrivewayguysaustin.com/a-beginners-guide-on-how-to-pour-a-concrete-driveway-in-sections/ for more information.

Visit: http://www.thedrivewayguysaustin.com/a-beginners-guide-on-how-to-pour-a-concrete-driveway-in-sections/ for more information.

A Step by Step Approach to Creating Concrete Driveways

You then need to create a formwork along the sides of the driveway to retain the concrete that will be laid, so that it is supported until it sets and gains its own rigidity. You can use wood or even bricks for such formwork. Place your order for the ready-mix concrete and ask for a schedule. Once you know when the concrete is arriving, it can help to wet down the prepared soil or gravel surface. The concrete supplier will lay down pipes that enable the full length of the driveway to be supplied with concrete. The poured concrete must be leveled to the height of the formwork you have in place, and this leveling must be done before the concrete sets. You can have the sort of finish you desire. Driveway surfaces must provide some traction to the tires of your vehicles, and must not be too smooth.

Protect the surface of the driveway with a polythene sheet after it has set reasonably and then flood the sheet with water to help in curing the concrete. This curing must be continued for at least a week, or to a period as suggested by the concrete supplier. The temporary formwork can then be removed and the sides backfilled with earth. You can start using the driveway once it has been properly cured.

Tags: , ,